Baizakura-do AR-002-83C (1/83) “Toilet Bowl” Kit

Baizakura-do AR-002-83C (1/83) “Toilet Bowl” Kit

Designed for use with 1/80–1/87 scale models and produced in 1/83 scale.
Also highly suitable as an optional accessory for “Outhouse A (Toilet Shed A)”.
2 toilet bowls included.
Includes paper assembly parts that can be installed inside “Outhouse A.”
Made from a translucent white resin with a ceramic-like appearance, so no painting is required for direct use.
※ To help protect the product, applying a UV clear coat is recommended.

About This Product
This product is made using UV-curing 3D printing.
If necessary, perform your own post-processing, such as sanding and trimming.
Please read the following notes before purchasing:
※ This is an online-store-exclusive product from Baizakura-do.
※ The contents shown in the second photo constitute the complete kit contents of this product.
(The blurred parts visible behind the toilet bowl in the photo are the installation parts for “Outhouse A.”)
※ When installing the toilet bowl in “Outhouse A,” the toilet bowl will protrude slightly beyond the bottom paper/base of the toilet shed.
If this is a concern, you can place a piece of thick paperboard or similar material underneath as a spacer to adjust the height.
※ To maintain product quality, the type of resin used and the configuration of the parts may be subject to change.

Product Details
Made from high-quality resin that offers excellent stability and toughness.
Water-washable resin containing hydrophilic groups is not used.
Cleaned using high-purity alcohol.
Special care is taken during post-processing, including secondary curing.

Storage Precautions
The following issues may still occur, although they are less likely compared with ordinary resin products:
Long-term changes may occur due to exposure to ultraviolet light.
The product may deform depending on the storage environment.
Unlike plastic products, prolonged pressure—for example, placing an object on top of the product for an extended period—may cause creep deformation.
The original shape may be restored to some extent by applying warm air. However, carefully monitor the condition of the product while doing so.

Adhesives and Painting
Ordinary model-making super glue / instant adhesive (CA glue) and model paints can be used for assembly and painting.
※ Solvent-based model cements such as Tamiya Cement cannot be used for bonding.
When using treatments containing a high proportion of solvents, such as panel washes or weathering solutions, be aware that the product may deform or warp.
It is recommended to test the treatment first using support material / spare support parts before applying it to the actual product.