Wilesco 00020 D20 蒸汽機引擎 (酒精塊加熱)

D20 Steam Engine Heated with Witabs

This stationary steam engine is the most produced machine in the Wilesco range. The 6.5 x 16.5 cm boiler has a volume of 500 cc. The steam pressure can be constantly monitored through the pressure gauge, and the drain valve can be used to remove any residual water from the boiler after use.

Our D20 is a model steam engine with plenty of power, making it ideal for running larger model systems. You'll find a wide selection of suitable drive models in our shop. The real steam-spewing chimney is also great fun, and the steam release can be regulated through the steam valve.

Like all Wilesco steam engine models, the D20 is "Made in Germany" and will run reliably for many years with adequate oiling and attention to the water level in the boiler.

The stationary steam engine is powered by our Witabs dry fuel, one charge of Witabs will last for about 10-15 minutes of steam fun.

D202 Steam Engine with Electric Heating

The D20 model is also available with electric heating as the D202.

Further Details on the Wilesco Steam Engine Model D20 and D202:

• Flywheel that can be started in both directions with a 10 cm diameter
• Spring safety valve
• Steam whistle with chain pull
• Steam shut-off hand wheel valve, centrifugal regulator, and steam jet lubricator
• Double-acting cylinder system with a diameter of 13 mm and a stroke of 16 mm
• Base dimensions: 29 x 35 cm
• Height: 32 cm
• Net weight: 2.3 kg
• Gift packaging: 36 x 30 x 20 cm
• Boiler volume: 500 cc
• Heating D20: Dry fuel (3 blocks of dry fuel included in delivery)
• Heating D202: Electricity